Traceability by Weller

 
Weller is traceability qualified

The de­mand for re­trace­able process re­li­a­bil­ity (trace­abil­ity) is in­creas­ing in spe­cific branches of in­dus­try, such as the elec­tron­ics sec­tor or au­to­mo­tive sec­tor. Fin­ished prod­ucts need to be re­trace­able and iden­ti­fi­able at all stages through­out the sup­ply chain, right down to the in­di­vid­ual com­po­nent. In this way, it is pos­si­ble to quickly iso­late sources of error and de­fects in the final prod­uct and start se­lec­tive re­call cam­paigns. Trace­abil­ity op­ti­mises processes within the com­pany and re­duces cost.

Weller is trace­abil­ity qual­i­fied

The fol­low­ing shows the work­flow of a se­r­ial num­ber ori­ented pro­duc­tion process using Weller sol­der­ing equip­ment (WX sta­tion). The work­flow in­cludes in­ter­ac­tions of the op­er­a­tor and the di­a­logue be­tween the trace­abil­ity sys­tems and the equip­ment (WX sol­der­ing sta­tion).

 
1. Begin pro­cess­ing of prod­uct: Scan PCB or prod­uct to be sol­dered.
  2. Trans­mis­sion of data to the Trace­abil­ity Sys­tem.
  3.a. Pre­pare WX sta­tion: the Trace­abil­ity Sys­tem de­liv­ers process pa­ra­me­ter se­lec­tion data.
3.b. Pa­ra­me­ter­i­za­tion of the WX sta­tion Process pa­ra­me­ter lock out: Auto tool tem­per­a­ture set and lock out.
4.a. Op­tional Con­trol: Process con­trol: Error or O.K.
  4.b. Vi­sual process con­trol via Weller LED ring light on the iron.
  5. Begin sol­der­ing of prod­uct with WX sta­tion (Equip­ment).
  6.a. Mon­i­tor dur­ing sol­der­ing process: Suc­cess con­trol.
6.b. unit­Data: Trans­mis­sion of sol­der­ing process data. (XML-File).

1. Begin pro­cess­ing of prod­uct: Scan PCB or prod­uct to be sol­dered.

2. Trans­mis­sion of data to the Trace­abil­ity Sys­tem.

3.a. Pre­pare WX sta­tion: the Trace­abil­ity Sys­tem de­liv­ers process pa­ra­me­ter se­lec­tion data.

3.b. Pa­ra­me­ter­i­za­tion of the WX sta­tion Process pa­ra­me­ter lock out: Auto tool tem­per­a­ture set and lock out.

4.a. Op­tional Con­trol: Process con­trol: Error or O.K.

4.b. Vi­sual process con­trol via Weller LED ring light on the iron.

5. Begin sol­der­ing of prod­uct with WX sta­tion (Equip­ment).

6.a. Mon­i­tor dur­ing sol­der­ing process: Suc­cess con­trol.

6.b. unit­Data: Trans­mis­sion of sol­der­ing process data. (XML-File).