WX soldering stations

One plat­form – Up to every chal­lenge

OUR WX TEAM

The five spe­cial­ists from the Weller WX Team will solve all your prob­lems to do with sol­der­ing, des­ol­der­ing and the use of hot-air in your man­u­fac­tur­ing process. The en­tire WX team of­fers full WX tool com­pat­i­bil­ity, tried-and-tested bench­top func­tions and all es­sen­tial trace­abil­ity fea­tures.

 

Safe man­ual sol­der­ing
Weller WX sta­tions make the man­ual sol­der­ing process safer, a cru­cial fac­tor in the au­to­mo­bile, aero­space and med­ical tech­nol­ogy in­dus­tries. This is guar­an­teed by tem­per­a­ture and tool lock­ing, and tool-spe­cific tem­per­a­ture set­tings.

ESD safe
All WX de­vices are ESD-safe and can be used in EPA re­gions.

Use as bench­top con­troller
In­te­grated USB ports allow WX sta­tions to be con­nected to and to con­trol sol­der­ing fume ex­trac­tors, pre-heat plates and pro­gram­ma­ble logic con­trollers (PLC). The con­nected tools feed back their pa­ra­me­ters and sta­tus to the dis­play.

Huge en­ergy sav­ings Usage sen­sor
Thanks to an in­te­grated sen­sor, WX tools are mo­tion ac­ti­vated. This means that they con­sume power only when they are ac­tu­ally in use. Con­nected ac­ces­sories also go into standby mode.

In­tel­li­gent tool de­tec­tion
All con­nected tools and ac­ces­sories are de­tected au­to­mat­i­cally by the sta­tions and their name(s) shown on the dis­play.

Trace­abil­ity
All WX sta­tions are trace­able and can be in­te­grated into an ex­ist­ing trace­abil­ity process.

Mul­ti­func­tional USB port
Firmware up­dates and reg­is­tra­tion are quick and easy using USB sticks. User-friendly PC in­ter­face.

Ex­tremely short learn­ing curve
Multi-lan­guage menu guide: Ger­man, Eng­lish, French, Ital­ian, Span­ish, Por­tuguese and Man­darin. Other lan­guages can be im­ple­mented on re­quest.

In­te­grated pa­ra­me­ter mem­ory
Pa­ra­me­ters such as standby tem­per­a­tures and au­to­matic switch-off time can eas­ily be stored in the sol­der­ing iron. Pa­ra­me­ters only need to be stored once; the sol­der­ing iron can then use them with any WX sta­tion.

Robot out­put
A dig­i­tal, op­ti­cally de­cou­pled robot con­nec­tion comes as stan­dard.

Max­i­mum safety, max­i­mum flex­i­bil­ity
A unique equipo­ten­tial bond­ing con­nec­tion is pro­vided free of charge. The jack sleeve has 4 pos­si­ble set­tings: hard earthed, equipo­ten­tial bond­ing, float­ing and soft earthed.