A va­ri­ety of work processes in­clud­ing sol­der­ing, bond­ing, weld­ing and laser ap­pli­ca­tions pro­duce fine dust par­ti­cles and gases which are harm­ful to both users and the en­vi­ron­ment. Many coun­tries have statu­tory guide­lines for air qual­ity in the work­place, which pre­scribe the treat­ment and avoid­ance of haz­ardous air­borne pol­lu­tants. The Weller phi­los­o­phy is to pro­tect em­ploy­ees by ex­tract­ing these fumes.

 

Weller Zero Smog 4V

The fume ex­trac­tion sys­tem Zero Smog 4V ex­tracts haz­ardous emis­sions right at the source and re­cir­cu­lates only com­pletely cleaned air into the work area. A sub­stan­tial con­tri­bu­tion to ob­serve legal reg­u­la­tions re­gard­ing clean air at the work en­vi­ron­ment that op­er­a­tor and valu­able tech­nol­ogy profit from.

 

En­ergy sav­ings

In Sleep Mode, the tur­bine rev­o­lu­tions are re­duced by 70% when the ex­trac­tion valves are closed. The ap­pli­ance also switches it­self off via the Auto-Off mode after a pre­set time.

 

 Quiet and ef­fi­cient

The Zero Smog 4V guar­an­tees con­stant ex­trac­tion per­for­mance and re­duces both en­ergy con­sump­tion and the sound level.

 

Ef­fi­ciency mon­i­tor­ing

The ap­pli­ance func­tion is doc­u­mented in an in­ter­nal mem­ory, can be read off eas­ily by means of a USB-stick and can be used as ev­i­dence of ef­fi­ciency.

 

Easy to use

The Zero Smog 4V fume ex­trac­tion sys­tem has four hose con­nec­tions. An Easy Click con­nec­tion is per­ma­nently in­stalled. The Easy click sys­tem of­fers many con­nec­tion pos­si­bil­i­ties and is easy to op­er­ate. The ap­pli­ance’s four glider rolls en­sure flex­i­ble work­ing use.

 

Air al­ways clean

An im­proved fil­ter sta­tus dis­play (red/yel­low/green) and an acoustic sig­nal give an early in­di­ca­tion of when a fil­ter needs to be re­placed. The fil­ter use time can also be pre­set in­di­vid­u­ally. This avoids con­tin­u­ing op­er­a­tion with a spent fil­ter.

 

Dig­i­tal dis­play

The back­lit dis­play alows easy multi-lin­gual user op­er­a­tion.

 

 

About Weller

The name Weller has been syn­ony­mous with for­ward-look­ing sol­der­ing so­lu­tions since 1959. The com­pany head­quar­ters of Weller Tools GmbH have been in Be­sigheim near Stuttgart for over 50 years now. Here, Weller sol­der­ing tools are de­vel­oped, pro­duced and mar­keted by over 200 em­ploy­ees. Weller is a world mar­ket leader in man­ual sol­der­ing sys­tems. Weller Tools GmbH is part of the um­brella com­pany Apex Tool Group. The Apex Tool Group with head of­fices in Sparks, MD, is one of the worlds biggest man­u­fac­tur­ers of in­dus­trial hand and power tools, drill chucks, chains and elec­tri­cal sol­der­ing prod­ucts with an­nual turnover of USD 1.3 bil­lion.

 

 

Weller Tools GmbH
Diana Zim­mer­mann
Carl-Benz-Str. 2
D - 74354 Be­sigheim

Tel.: +49 7143/580-135
Fax: +49 7143/580-169
E-Mail: mar­ket­ing@​weller-​tools.​com
Web: www.​weller-​tools.​com