Weller Zero Smog TL – Pssst! Low-noise gas and particle extraction

The Weller Zero Smog TL low-noise fume ex­trac­tion unit en­sures pure breath­able air in the work­place thanks to its extra large HEPA H13 fil­ter sur­face.

 

Ef­fi­cient and low-noise ex­trac­tion
The main­te­nance-free and brush­less EC blower guar­an­tees an ex­trac­tion vol­ume of 190 m3/h and a strong vac­uum of 3000 Pa. The unit runs ex­tremely qui­etly and en­sures a quiet work en­vi­ron­ment. The au­to­matic fil­ter mon­i­tor­ing sys­tem and the au­dio­vi­sual fil­ter alarm in­form the user in good time when a fil­ter change is due. The fil­ter can be changed quickly and eas­ily. Zero Smog TL op­ti­mises the area of use at one to two work­places and suc­cess­fully pro­tects the health of users.

Longer fil­ter ser­vice life
The extra large fil­ter sur­face en­sures that the HEPA H13 fil­ter has a long ser­vice life. This guar­an­tees op­ti­mum par­ti­cle fil­ter­ing. The F7 pre-fil­ter also in­creases the ser­vice life for ap­pli­ca­tions with a high flux con­tent or vol­umes of fine dust. In ad­di­tion, the ex­trac­tion power and/or the vol­ume flow of the Zero Smog TL can be vari­ably ad­justed de­pend­ing on the ap­pli­ca­tion re­quire­ments and the num­ber of work­places. The ac­ti­vated car­bon fil­ter pro­vides ef­fec­tive gas clean­ing.

Sim­ple and se­cure in­stal­la­tion
The portable ex­trac­tion unit can be po­si­tioned quickly and eas­ily di­rectly under or next to the work­place. In­stal­la­tion with the flex­i­ble Easy-Click ex­trac­tion arms en­ables op­ti­mum adap­ta­tion to the local con­di­tions.

At a glance:

  • Ex­trac­tion unit for use at up to two work­places
  • Portable ex­trac­tion unit for flex­i­ble po­si­tion­ing di­rectly under or next to the work­place
  • Easy fil­ter re­place­ment
  • Au­dio­vi­sual fil­ter alarm
  • Quick and sim­ple in­stal­la­tion with the Easy-Click sys­tem
  • Vari­able vol­ume flow ad­just­ment
  • Com­pact fil­ter com­pris­ing H13 par­ti­cle fil­ter + gas fil­ter (ac­ti­vated car­bon)
  • Main­te­nance-free due to high-qual­ity brush­less EC gas blower

 Tech­ni­cal data:

Max. ca­pac­ity    Two work­places
Max. blower flow rate 190 m3/h
Max. blower vac­uum  3.000 Pa
Mains volt­age   230 V, 50 Hz (120 V, 60 Hz)
Power                                  120 W
Sound level                 50 db (A) at a dis­tance of 1 m
Pre-fil­ter                  F7 fine dust pre-fil­ter
Com­pact fil­ter H13 par­ti­cle fil­ter + gas fil­ter (ac­ti­vated car­bon)
Di­men­sions (L x W x H) 335 x 330 x 445 mm

 

About Weller

The Weller name stands for pi­o­neer­ing so­lu­tions in sol­der­ing tech­nol­ogy. Founded in 1945, the com­pany quickly grew to be­come the mar­ket leader in man­ual sol­der­ing tech­nol­ogy. Wellers ex­ten­sive range of prod­ucts in­cludes in­no­v­a­tive so­lu­tions for in­dus­try and trade. The com­pa­nys areas of ex­per­tise in­clude con­ven­tional sol­der­ing tech­nol­ogy such as ex­trac­tion sys­tems, pre­ci­sion tools and so­lu­tions in­volv­ing screws, bolts and ro­bots as well as many other bench­top prod­ucts and ser­vices.

In ad­di­tion to its head­quar­ters in Be­sigheim, Ger­many, the com­pany has pro­duc­tion sites in Eu­rope, the USA and Latin Amer­ica. Since 2010, Weller Tools GmbH has op­er­ated as part of the Apex Tool Group. With 8000 em­ploy­ees and an an­nual turnover of more than USD 1.6 bil­lion, the Apex Tool Group, head­quar­tered in Sparks, Mary­land, is one of the worlds largest man­u­fac­tur­ers of in­dus­trial hand and power tools, drill chucks, chains and elec­tri­cal sol­der­ing prod­ucts.

 

Weller Tools GmbH
Diana Zim­mer­mann
Carl-Benz-Str. 2
74354 Be­sigheim, Ger­many

Tel.: +49 (0) 7143/580-135
Fax: +49 (0) 7143/580-169
mar­ket­ing@​weller-​tools.​com
www.​weller-​tools.​com