Power unit WXR 3, , 3 channels with WXHAP 200 Hot air iron, WXDP 120 Desoldering iron and WXP 65 Soldering iron
| Width | 235.0 mm |
| Height | 102.0 mm |
| Length | 273.0 mm |
| Dimensions L x W x H | 273.0 x 235.0 x 102.0mm |
| Capacity (l/min) | 18 l/min |
| Equipotential Bonding Socket | Via 3.5mm Pawl Socket on Back of Device (Hard-Grounded) |
| ESD Safe | Yes |
| Interface | 1x USB, 2x RS232, 2x Switching Output |
| Maximum Hot Air Flow Rate l/min (Depends on Tool) | 15 l/min |
| Maximum Volume | 0.7 bar |
| Number of Channels | 3 |
| Overcurrent Release | 2 A |
| Power | 420 W (600 W) |
| Temperature Accuracy °C | ± 9 °C |
| Temperature Accuracy °F | ±17 °F |
| Temperature Accuracy for Hot Air | ±30 °C |
| Temperature Range °C | 100 - 450 °C (550 °C) |
| Temperature Range °F | 200 - 850 °F (999 °F) |
| Temperature Stability °C | ±2 °C |
| Temperature Stability °F | ±4 °F |
| Tip Type | LT RTM RTW WX XHT XNT XT |
| USB | USB interface of firmware updates, parameterization and monitoring USB interface supports all standard USB flash drive types |
| Voltage | 230 V (50/60 Hz) |
