5ASA

Precision tweezers, lightly curved 15°, relieved. Very pointed tips, e.g. for installing small components.
article number: 5ASA

 

 

Ex tax   26,10 €

 

 


 
For applications in biology, medicine, laboratory technology and microelectronics
Bent shape facilitates access to confined spaces
Special stainless steel, nonmagnetic, non-rusting, acid-proof, heat-resistant
 
 
 

Erem man­u­fac­tures a wide range of pre­ci­sion tweez­ers. The range cov­ers tweez­ers made from hard­ened steel, stain­less steel, non-mag­netic acid re­sis­tant stain­less steel, ti­ta­nium, brass, nickel sil­ver and nickel-plated tweez­ers. Tweezer tips can be ser­rated or smooth metal, or made from syn­thetic ESD safe ma­te­r­ial to pre­vent dam­age to frag­ile sur­faces.

In ad­di­tion to SMD and strip­ping tweez­ers, the range in­cludes spe­cial grip­ping tweez­ers, which en­able par­tic­u­larly fine wires or in­su­lated op­ti­cal fi­bres to be held and ma­nip­u­lated.

Erem can make to order tweez­ers for spe­cialised ap­pli­ca­tions. The com­bi­na­tion of pre­ci­sion-man­u­fac­tured, sym­met­ri­cal tips and per­fect bal­ance make Erem tweez­ers out­stand­ing high-pre­ci­sion tools of the high­est qual­ity.

 
Material

The choice of which tweez­ers to use will de­pend as much on the ma­te­r­ial it is made from as the func­tion it car­ries out:

Hard­ened steel

Tweez­ers made from hard­ened steel are typ­i­fied by their par­tic­u­larly hard tips, which en­sure great dura­bil­ity. The tweez­ers are mag­netic and the ma­te­r­ial is not non-rust­ing.

Stain­less steel

Tweez­ers made from stain­less steel have ro­bust tips and are non-rust­ing. The ma­te­r­ial is less hard than hard­ened steel. Stain­less-steel tweez­ers have the iden­ti­fi­ca­tion let­ter „S“ in their order num­bers.

Erem spe­cial stain­less steel

This alloy is non-mag­netic. The tweez­ers are non-rust­ing, acid-proof and heatre­sis­tant up to 300°C (512°F). Tweez­ers made from spe­cial stain­less steel tweez­ers have the iden­ti­fi­ca­tion let­ter „SA“ in their order num­bers.

Ti­ta­nium

Ti­ta­nium tweez­ers are light weight and re­sis­tant to high tem­per­a­tures.

 

 
Coating

Only Erem of­fers tweez­ers with a spe­cial Py­ro­plast coat­ing.

Ad­van­tages:

Heat-re­sis­tant up to 500°C (932°F), al­most twice as high as Teflon® or Cralon

No cap­il­lary ef­fect on tips, e.g. while sol­der­ing (non-stick prop­erty)

No con­t­a­m­i­na­tion caused by pos­i­tive or neg­a­tive charge

Water-re­sis­tant

Ra­di­a­tion-re­sis­tant

Thick­ness of coat­ing 60-80 μ

The Py­ro­plast coat­ing is not avail­able on all Erem tweez­ers.

It is made to order and re­quires a min­i­mum order quan­tity.

Please con­tact your near­est sales of­fice for more in­for­ma­tion.

 

 
Ergonomic

Erem has de­vel­oped a se­ries of tweez­ers with er­gonomic han­dles to re­duce the risk of Repet­i­tive Strain In­juries (RSI) to the hands.

The iden­ti­fi­ca­tion let­ter in the order num­ber is „E“.

Erem also of­fers two fur­ther in­no­v­a­tive tweez­ers with er­gonom­i­cally shaped han­dles:

E15AGW cut­ting tweez­ers with hard­ened cut­ting edges for in­creased ser­vice life

EOODSA pre­ci­sion tweez­ers with straight strong tips which are in­side-ser­rated for se­cure han­dling

Ad­van­tages:

Er­gonom­i­cally shaped han­dles re­duce Carpal Tun­nel Syn­drome (CTS) and early hand fa­tigue

Two-color, ther­mally in­su­lated soft-grip han­dles made from soft foam ma­te­r­ial en­sure high user com­fort

Man­u­fac­tured from non-mag­netic, acid-proof and stain­less steel alloy

ESD-safe

 

5ASA
article number: 5ASA

Precision tweezers, lightly curved 15°, relieved. Very pointed tips, e.g. for installing small components.
Length mm 115
Weight in g 12
Length Inches 4.528
Material Special stainless steel
Weight in oz 0.42
7SA
7SA
Precision tweezers, curved, relieved, with pointed tips. Excellent handling in confined spaces.
5BSA
5BSA
Precision tweezers, curved 30°, relieved. Pointed tips. Relieved shape at front of handle provides excellent visibility of the area to be worked on.
5ASASL
5ASASL
Precision tweezers, lightly curved 15°, relieved. Very pointed tips, e.g. for installing small components. Same as 5ASA, but economy model.
24SA
24SA
Precision tweezers, curved 40°, with robust pointed tips. Serrated finger grips and inside-serrated tips for secure handling. Guide pin to avoid overlapping of tips. Ideally suitable for soldering and assembly jobs.
5CSA
5CSA
Precision tweezers, curved 30°, relieved. Pointed tips. Relieved shape at front of handle provides excellent visibility of the area to be worked on.