Power unit WR 2, 2 channels with soldering iron WP 80, desoldering iron DSX 80
Small repair set for all rework applications
Simultaneous operation of up to 2 soldering tools (hot air and desoldering iron at the same time is not possible)
| Width | 235.0 mm |
| Height | 102.0 mm |
| Length | 273.0 mm |
| Dimensions L x W x H | 273.0 x 235.0 x 102.0mm |
| Automatic Tool Identification | Yes |
| Capacity (l/min) | 18 l/min |
| Desoldering | Yes |
| Equipotential Bonding Socket | Via 3.5mm Jack Bush (Initial State-Hard-Grounded) |
| ESD Safe | Yes |
| Hot Air (picto) | Yes |
| IPC Compliant | (Tip to Ground) Corresponds to IPC-J-001D |
| Maximum Hot Air Flow Rate l/min (Depends on Tool) | 10 l/min |
| Maximum Volume | 0.7 bar |
| Number of Channels | 2 |
| Overcurrent Release | 1,6 A |
| Power | 250 W (300 W) |
| Temperature Accuracy °C | ± 9 °C |
| Temperature Accuracy °F | ±17 °F |
| Temperature Accuracy for Hot Air | ±30 °C |
| Temperature Range °C | 50 - 550 °C |
| Temperature Range °F | 150 - 950 °F |
| Temperature Stability °C | ±2 °C |
| Temperature Stability °F | ±4 °F |
| UPC | 037103305527 |
| Vacuum | 0,7 bar |
| Voltage | 230 V |
