Zero Smog 4V Kit with WEHB extraction hood

Fume extraction Zero Smog 4V with Extraction Hood WEHB, bottom extraction
article number: FT91000025N

 

>

 

Ex tax   2.061,00 €

 

 


 
The Zero Smog 4V kit with WEHB Extraction Hood could used for gluing or cleaning applications where gases from solvents or glue, lighter than air have to be extracted from below. The work place is covered with a puncheed steel plate. To guarantee sufficient extraction results an extraction unit with minimum 230 m³/h must be connected to the hoods.
 
 
 
Zero Smog 4V Kit with WEHB extraction hood
article number: FT91000025N

Fume extraction Zero Smog 4V with Extraction Hood WEHB, bottom extraction
Dimensions L x W x H (mm) 860 x 510 x 460
Weight (approx.) in kg 8
Dimensions L x W x H (Inches) 33,8 x 20,0 x 18,1
Capacity m³/h 230
Noise level (distance 1 m) dB(A) 48
Voltage 230 V, 50/60 Hz
WX compatible on
Max. blower vacuum (Pa) 3.800
Power 275 VA
Pre-filter Pre filter mat class F7
Compact filter Particle filter H13, Wide band gas filter (50 % Active carbon + 50 % Chemisorb)
Housing PET not ESD safe
700-3051-ESD
Extraction hose 3 meter
Easy-Click 60 Extraction hose Ø 60 mm, length: 3 meter
FT91000023N
WEHB Exhaust hood for glueing / cleaning
WEHB Extraction Hood Bottom for gluing or cleaning applications
T0053661699N
Zero Smog 4V Adhesive fume filter
Fume extraction unit Zero Smog 4V
T0053119199
RS 232 Interface cable
Interface cable RS 232, 2 m (78.74 in) for remote control or monitoring by PC (type 1:1) T005 87 359 09
T0058735895N
Wide band gas filter for adhesive fumes
Wide band gas filter for adhesive fumes for Zero Smog 4V, WFE 2ES, WFE 2S