Erem man­u­fac­tures a wide range of pre­ci­sion tweez­ers. The range cov­ers tweez­ers made from hard­ened steel, stain­less steel, non-mag­netic acid re­sis­tant stain­less steel, ti­ta­nium, brass, nickel sil­ver and nickel-plated tweez­ers. Tweezer tips can be ser­rated or smooth metal, or made from syn­thetic ESD safe ma­te­r­ial to pre­vent dam­age to frag­ile sur­faces.

In ad­di­tion to SMD and strip­ping tweez­ers, the range in­cludes spe­cial grip­ping tweez­ers, which en­able par­tic­u­larly fine wires or in­su­lated op­ti­cal fi­bres to be held and ma­nip­u­lated.

Erem can make to order tweez­ers for spe­cialised ap­pli­ca­tions. The com­bi­na­tion of pre­ci­sion-man­u­fac­tured, sym­met­ri­cal tips and per­fect bal­ance make Erem tweez­ers out­stand­ing high-pre­ci­sion tools of the high­est qual­ity.

The choice of which tweez­ers to use will de­pend as much on the ma­te­r­ial it is made from as the func­tion it car­ries out:

Hard­ened steel

Tweez­ers made from hard­ened steel are typ­i­fied by their par­tic­u­larly hard tips, which en­sure great dura­bil­ity. The tweez­ers are mag­netic and the ma­te­r­ial is not non-rust­ing.

Stain­less steel

Tweez­ers made from stain­less steel have ro­bust tips and are non-rust­ing. The ma­te­r­ial is less hard than hard­ened steel. Stain­less-steel tweez­ers have the iden­ti­fi­ca­tion let­ter „S“ in their order num­bers.

Erem spe­cial stain­less steel

This alloy is non-mag­netic. The tweez­ers are non-rust­ing, acid-proof and heatre­sis­tant up to 300°C (512°F). Tweez­ers made from spe­cial stain­less steel tweez­ers have the iden­ti­fi­ca­tion let­ter „SA“ in their order num­bers.

Ti­ta­nium

Ti­ta­nium tweez­ers are light weight and re­sis­tant to high tem­per­a­tures.

Only Erem of­fers tweez­ers with a spe­cial Py­ro­plast coat­ing.

Ad­van­tages:

Heat-re­sis­tant up to 500°C (932°F), al­most twice as high as Teflon® or Cralon

No cap­il­lary ef­fect on tips, e.g. while sol­der­ing (non-stick prop­erty)

No con­t­a­m­i­na­tion caused by pos­i­tive or neg­a­tive charge

Water-re­sis­tant

Ra­di­a­tion-re­sis­tant

Thick­ness of coat­ing 60-80 μ

The Py­ro­plast coat­ing is not avail­able on all Erem tweez­ers.

It is made to order and re­quires a min­i­mum order quan­tity.

Please con­tact your near­est sales of­fice for more in­for­ma­tion.

Erem has de­vel­oped a se­ries of tweez­ers with er­gonomic han­dles to re­duce the risk of Repet­i­tive Strain In­juries (RSI) to the hands.

The iden­ti­fi­ca­tion let­ter in the order num­ber is „E“.

Erem also of­fers two fur­ther in­no­v­a­tive tweez­ers with er­gonom­i­cally shaped han­dles:

E15AGW cut­ting tweez­ers with hard­ened cut­ting edges for in­creased ser­vice life

EOODSA pre­ci­sion tweez­ers with straight strong tips which are in­side-ser­rated for se­cure han­dling

Ad­van­tages:

Er­gonom­i­cally shaped han­dles re­duce Carpal Tun­nel Syn­drome (CTS) and early hand fa­tigue

Two-color, ther­mally in­su­lated soft-grip han­dles made from soft foam ma­te­r­ial en­sure high user com­fort

Man­u­fac­tured from non-mag­netic, acid-proof and stain­less steel alloy

ESD-safe