WAD101N Kit 120V
WAD101N Kit 120V
Item No.:
WAD101N
Hot air station, 1 channel 120 V / 60 Hz
Product features
-
Optional WCB1 - T0053118299 programming module provides temperature lock-out, set back, ° F to ° C conversion, factory reset functions
-
Requires clean, filtered compressed air supply of 58 - 87 PSI
Technical data
| Length | 6.8 in |
| Dimensions L x W x H | 175.0 x 135.0 x 102.0mm |
| Air Consumption | 10 l/min |
| Capacity (l/min) | 10 l/min |
| Compressed Air Connection (Outer Diameter) | 6.0mm |
| Compressed Air Connection Accessory | Oil free, dry compressed air |
| Compressed Air Supply (kPa/bar) | 400 kPa / 4 bar |
| Equipotential Bonding Socket | Via 3.5mm jack bush (initial state-hard-grounded) |
| Fuse | T10A |
| Hot Air (picto) | Yes |
| Inert Gas Function | The inlet pressure is set permanently to 200 kPa by a pressure regulator. The pressure regulator must not be adjusted. |
| Maximum Hot Air Flow Rate l/min (Depends on Tool) | 0 - 10 l/min |
| Number of Channels | 1 |
| Operating Pressure | 4 bar 58 psi |
| Power | 105 W |
| Temperature Accuracy °C | ± 9°C, ± 30°C |
| Temperature Accuracy °F | ± 17°F, ± 50°F |
| Temperature Range °C | 50 - 450 °C (550 °C) |
| Temperature Range °F | 122 - 842 °F (999 °F) |
| Temperature Stability °C | ± 2°C |
| Temperature Stability °F | ± 5°F |
| UPC | 037103304100 |
| Voltage | 120V (60 Hz) |
| Weight (Catalog) | 2.40 kg |
| Product Family | Rework, Hot Air, Desoldering Stations |
Downloads
-
Download jpg jpg (135.7 KB) jpg (135.7 KB)
Download jpg jpg (428.04 KB) jpg (428.04 KB) -
WEL_WT_Stations_FR_3_DSDownload pdf pdf (1.8 MB) pdf (1.8 MB)
WEL_HAP1_HAP200_OI_T0055705708_webDownload pdf pdf (4.04 MB) pdf (4.04 MB)
WEL_WAD101_WAD101IG-OI_T0055680611_webDownload pdf pdf (3.11 MB) pdf (3.11 MB)
Are you searching
something specific?
something specific?