Was ist der Unterschied zwischen Flush-Schnitt und Semi-Flush-Schnitt?

Beim Flush-Schnitt bleibt praktisch kein Grat am Werkstück, beim Semi-Flush bleibt ein minimaler Rest. Der Unterschied zeigt sich in der Praxis: Flush wählen Sie, wenn die Schnittfläche glatt sein muss, etwa an sichtbaren Lötstellen oder in beengten Gehäusen. Semi-Flush ist die bessere Wahl bei härteren Drähten, weil die Schneide stabiler bleibt und länger hält.

Wofür braucht man einen ESD-sicheren Seitenschneider?

Elektrostatische Entladungen schädigen elektronische Bauteile, oft ohne sofort sichtbare Spuren. Der Defekt zeigt sich manchmal erst Wochen später im Betrieb. Unsere EREM Seitenschneider sind ESD-sicher und haben ableitfähige Griffe, die statische Aufladung zuverlässig abführen. In ESD-geschützten Arbeitsbereichen (EPA) sind sie in der Regel vorgeschrieben.

Welcher EREM Seitenschneider eignet sich für die Medizintechnik?

In unserem Sortiment finden Sie verschiedene Seitenschneider, welche die erhöhten Anforderungen an Präzision, Oberflächenreinheit und Wiederholgenauigkeit, die für die Medizintechnik notwendig sind, problemlos erfüllen. Für eine konkrete Empfehlung wenden Sie sich am besten an den Weller-Fachberater, der die passende Serie für Ihre Anwendung bestimmt.

Wie lange halten Weller EREM Seitenschneider?

Unsere induktionsgehärteten Schneiden und die Magic Spring™ Rückstellfeder halten besonders lange, die genaue Lebensdauer hängt aber natürlich von der jeweiligen Nutzung ab. Für eine maximale Standzeit empfehlen wir, den Seitenschneider nur innerhalb des angegebenen Drahtdurchmessers zu verwenden und ihn vor Feuchtigkeit geschützt aufzubewahren.

Side Cutters

2412E

5" ESD Safe Semi-Flush Oval Head Side Cutter

Show Article

2412EW

5" ESD Safe Semi-Flush Oval Head Side Cutter with Wire Holder

Show Article

2422E

5" ESD Safe Flush Oval Head Side Cutter

Show Article

2422EA

5" ESD Safe Flush Round Tip Tapered Head Cutter

Show Article

2422EB

5" ESD Safe Flush Round Tip Tapered Relieved Head Cutter

Show Article

2422EW

5" ESD Safe Flush Oval Head Side Cutter with Wire Holder

Show Article

2432E

5" ESD Safe Super Full-Flush Oval Head Side Cutter

Show Article

2432EW

5" ESD Safe Super Full-Flush Oval Head Side Cutter with Wire Holder

Show Article

2441E

Show Article

2476TX1

Side cutter - hard metal blades - tapered head.- smooth and precise rounded tips

Show Article

2476TX1W

5" ESD Safe Flush Tapered Head Side Cutter with Wire Holder

Show Article

2476TX2

5" ESD Safe Flush Oval Head Side Cutter

Show Article

2477E

5" ESD Safe Flush Tapered Head Side Cutter

Show Article

2477EW

5" ESD Safe Flush Tapered Head Side Cutter with Wire Holder

Show Article

2622NB

5" ESD Safe Flush Pointed Relieved Head Side Cutter

Show Article

512E

4-1/2" ESD Safe Semi-Flush Oval Head Side Cutter

Show Article

512N

4-1/2" ESD Safe Semi-Flush Oval Burnished Head Side Cutter

Show Article

512NW

4-1/2" ESD Safe Semi-Flush Oval Burnished Head Side Cutter with Wire Holder

Show Article

522E

4-1/2" ESD Safe Flush Oval Head Side Cutter

Show Article

522N

4-1/2" ESD Safe Flush Oval Head Side Cutter

Show Article

522NW

4-1/2" ESD Safe Flush Oval Head Side Cutter with Wire Holder

Show Article

532N

4-1/2" ESD Safe Super Full-Flush Oval Head Side Cutter

Show Article

532NW

4-1/2" ESD Safe Super Full-Flush Oval Head Side Cutter with Wire Holder

Show Article

576TX1

Tungsten-carbide cutters

Show Article

576TX2

4-1/4" ESD Safe Flush Oval Head Side Cutter

Show Article

577E

4-1/2" ESD Safe Flush Tapered Short Head Side Cutter

Show Article

577EW

4-1/2" ESD Safe Flush Tapered Short Head Side Cutter with Wire Holder

Show Article

592E

4-1/2" ESD Safe Flush Pointed Relieved Head Tip Cutter

Show Article

592EW

4-1/2" ESD Safe Flush Pointed Relieved Head Tip Cutter with Wire Holder

Show Article

595E

4-1/2" ESD Safe Flush Tapered Head Side Cutter

Show Article

595EW

4-1/2" ESD Safe Flush Tapered Head Side Cutter with Wire Holder

Show Article

595T

4-1/4" Diagonal Semi-Flush Cut Magic Carbide Cutter

Show Article

595TF

Show Article

599E

4-1/2" ESD Safe Flush Oval Head Side Cutter

Show Article

599EW

4-1/2" ESD Safe Flush Oval Head Side Cutter with Wire Holder

Show Article

599T

Side cutter - oval head

Show Article

599TF

Side cutter - oval head - hard metal blades

Show Article

599TW

Show Article

612N

4-1/4" ESD Safe Semi-Flush Oval Head Side Cutter

Show Article

612NW

4-1/4" ESD Safe Semi-Flush Oval Head Side Cutter with Wire Holder

Show Article

622N

4-1/4" ESD Safe Flush Oval Head Side Cutter

Show Article

622NA

4-1/4" ESD Safe Flush Tapered Head Side Cutter

Show Article

622NAW

4-1/4" ESD Safe Flush Tapered Head Side Cutter with Wire Holder

Show Article

622NB

4-1/4" ESD Safe Flush Pointed Relieved Head Tip Cutter

Show Article

622NBW

4-1/4" ESD Safe Flush Pointed Relieved Head Tip Cutter with Wire Holder

Show Article

622NW

4-1/4" ESD Safe Flush Oval Head Side Cutter with Wire Holder

Show Article

622TX

Side cutter - oval head, Miniature cutter

Show Article

632N

4-1/4" ESD Safe Super Full-Flush Oval Head Side Cutter

Show Article

776E

4-1/4" ESD Safe Super Full-Flush Short Pointed Relieved Head Tip Cutter

Show Article

792E

4-1/2" ESD Safe Super Full-Flush Pointed Relieved Head Tip Cutter

Show Article

812N

4-3/4" ESD Safe Semi-Flush Oval Head Side Cutter

Show Article

822N

4-3/4" ESD Safe Flush Oval Head Side Cutter

Show Article

884E

4-3/4" ESD Safe Flush Pointed Relieved Head Tip Cutter

Show Article

884EPCM

4-1/2" ESD Safe Flush Side Cutter for Printed Circuit Boards

Show Article

886E

4-3/4" ESD Safe Flush Tapered Head Side Cutter

Show Article

896E

4-3/4" ESD Safe Semi-Flush Oval Head Side Cutter for Hard Wires

Show Article

Precision Side Cutters for Demanding Cutting Tasks

Built for precision in electronics and fine mechanics: Our EREM side cutters and pointed cutters are developed and manufactured in Switzerland to deliver outstanding quality where precise work matters most. You can see the difference in every detail, from the hand-ground cutting edges and the build quality to their exceptional durability. For decades, they have been standard equipment in electronics manufacturing, medical technology and microelectronics. With over 100 models across five series, our range covers everything from micro side cutters for ultra-fine circuit traces to maxi cutters for thicker wires. Discover our full range of professional side cutters now!

Induction-Hardened Cutting Edges for Lasting Sharpness

The cutting edges of our EREM side cutters are induction-hardened to over 63 HRC on the Rockwell scale, then hand-ground to a fine finish. This combination of machine hardening and manual precision work produces a cut quality that purely machine-based manufacturing simply cannot match. Three cut types cover different requirements: The semi-flush cut leaves a minimal burr but keeps the cutting edge stable for longer. The flush cut trims level with the surface, leaving no visible burr. The super full-flush cut is completely burr-free, delivering a perfectly flat cut. The right cut type depends on the wire material and the surface quality you need. The patented Magic Spring™ technology takes things further: Its integrated return spring withstands over one million closing cycles at consistent spring force. When repetitive production work demands thousands of cuts per day, it significantly reduces the effort required and helps prevent early hand fatigue.

ESD-Safe Side Cutters for Sensitive Electronics

Anyone who works on PCBs and SMD components knows the risk: Even a minor electrostatic discharge can destroy components. Our EREM range therefore uses dissipative grip materials that safely discharge static electricity before it reaches the component.

Different applications call for different series. The 600 Micro series, which includes the 632N among other models, is designed for the most delicate work on thin wires. The 2400 MagicSense series, with cutters such as the 2422E, combines robustness, visibility and accessibility, and its ergonomic design helps prevent hand fatigue. For larger cross-sections, the 800 Maxi series provides the leverage needed, and that includes our 886E side cutters. All three options are ESD-safe, making them suitable for microelectronics, medical technology and any workstation where ESD protection is mandatory.

Weller-tools-EREM-Precision-tools-banner-cutters-

Frequently Asked Questions

What is the difference between a flush cut and a semi-flush cut?

With a flush cut, virtually no burr remains on the workpiece; with a semi-flush cut, a minimal residue is left. The difference matters in practice: Choose flush when the cut surface needs to be smooth, for example at visible solder joints or inside tight enclosures. Semi-flush is the better choice for harder wires, because the cutting edge stays more stable and lasts longer.
Why do I need an ESD-safe side cutter?

Electrostatic discharge damages electronic components, often without leaving immediately visible traces. The defect sometimes only shows up weeks later during operation. Our EREM side cutters are ESD-safe and feature dissipative grips that reliably discharge static build-up. In ESD-protected areas (EPAs), they are generally mandatory.
Which EREM side cutter is suitable for medical technology?

Our range includes a variety of side cutters that meet the high standards for precision, surface cleanliness and repeatability that medical technology demands. For a specific recommendation, we suggest contacting your Weller specialist adviser, who can identify the right series for your application.
How long do Weller EREM side cutters last?

Our induction-hardened cutting edges and the Magic Spring™ return spring are built for long service life, though exact durability naturally depends on usage. For maximum tool life, we recommend only using the side cutters within the specified wire diameter range and storing them in a dry environment.

Please choose your location and language

Please choose your location and language

Side Cutters

Precision Side Cutters for Demanding Cutting Tasks

Induction-Hardened Cutting Edges for Lasting Sharpness