WE1010 EDUCATION KIT 120V

WE 1010 Education Kit, 120 V
article number: WE1010EDU

 

>

 

Ex tax   $ 172.00

 

 


Power unit, 1 channel with soldering iron WEP 70 and safety rest PH 70; Shearcutter 170mn; WSW SCN M1 Solder Wire 100 g; Soldering Tips Lötspitzen ETA 1.6 mm; ETB 2.4 mm
70W solder iron with ergonomic handle and providing toolless tip change
ESD safe station, iron and heat-resistant silicon cable for safe handling
Using ET soldering tips
Standby mode and auto setback conserves energy, protects equipment
Password-protected to preserve settings
170MN general purpose shearcutter, diagonal, flush. Greatly reduced machanical shock delievered to the component, ESD safe
WSW solder wire; all purpose solder wire with excellent wetting properties
 
 
 
WE1010 EDUCATION KIT 120V
article number: WE1010EDU

WE 1010 Education Kit, 120 V Digital 70 W soldering station. This allows the iron to heat up fast and to provide a fast recovery time – gets the job done quicker with more efficiency and precision. The station is designed in a state-of-the-art housing with front panel power switch for easy access. ESD safe Station automatically powers down to a given temperature when not in use. All settings can be secured with a password, so that predefined settings can be maintained in order to ensure process quality. New high performance 70 W soldering iron with an ergonomic handle and easy toolless tip change solution. Replacement for 4ETH, 4ETK, 4ETO, 4ETS necessary. For WEP 70 4ETHL, 4ETKL, 4EKOL and 4ETSL must be used. Sets temperature back automatically when not in use to save energy and increase tip life­time.
Dimensions L x W x H (mm) 150 x 120 x 98
Dimensions L x W x H (Inches) 5.91 x 4.72 x 3.86
Weight (approx.) in kg 1.4
Channels 1
Temperature range (depends on tool) °C 100 - 450
Temperature range (depends on tool) °F 200 - 850
Temperature accuracy °C Average tip temperature can be „offset“ to +/- 5°C at idle with no load
Temperature accuracy °F Average tip temperature can be „offset“ to +/- 9°F at idle with no load
Temperature stability °C ± 6
Temperature stability °F ± 10
Heating time (approx.) in seconds (50–350 °C/120–660 °F) 28 sec.
Power 85 W
Cord WEP 70, 4 ft
T0051401399
WSW SCN M1 0,8 mm
WSW SCN M1 solder wire 0.8 mm 100g
ETB
ETB
Tip, Weller® Soldering, Chisel 0.094" for EC1201A/PES51 Irons
170MN
SHEARCUTTER,MICRO,ESD,CARDED,127MM
Shearcutter, Weller® Xcelite® general purpose with Blue grips, 5", carded
ETA
ETA
WE1010NA
WE1010NA
1-channel-soldering station with WEP 70 soldering iron and PH 70 safety rest